10 Easiest ADB Commands You Never Heard

10 Easiest Android Terminal (ADB) Commands You Never Heard

Android Debug Bridge (ADB) is very crucial for android developers. Similarly, commands are something that an average Android developer will need to be able to perform. We can execute instructions quickly and easily with the assistance of terminals. These also play an important role in the communication between our various gadgets. Because so many of the instructions are useful, this makes it possible for us to access them with very little effort. As a result, we have a greater need for android terminal commands.

The vast majority of us find that connecting our Android phones to a computer and exchanging information with them is difficult. When we are unable to resolve an issue on our Android phone, we are required to communicate with the device. In order to do that, we will need to be familiar with a few tools and instructions. Also, we will talk about 10 ADB commands that every developer must know.

Table of Contents

Here are the top 10 ADB commands everyone should know.

     Android Terminal Command      Key Feature   
1.  The ADB devices command  Examines communication between the devices 
2.  The ADB push command Moves a file onto devices programmatically
3. The ADB pull command Pulls the received files into the devices
4. The ADB reboot command Reboots device from the command line 
5. The ADB reboot-bootloader and ADB reboot recovery commands Very handy and reboots devices to the bootloader 
6. The fastboot devices command Commands can be executed at  a good speed   
7. The fastboot unlock command Unlocks the bootloader 
8. The  ADB  install command Installation of apps 
9. The ADB sideload command A download of an update in the form of a zip file 
10. The ADB Shell commandWorks in two ways to execute commands

1. The ADB Devices Command

This ADB command is intended to ensure that your computer and Android devices are in contact with one another. It is at the top of the list owing to its high level of productivity. You don’t have to be an operating system expert to use this program.

Also Read: Perfect Player APK for Smart TV & How to install It?

You may simply launch your terminal or command prompt and go to the location where you installed the extract utility.

If you obtain a serial number, you’re at the proper place. If you do not see the serial number, you are in the incorrect location, or there was an error during the device driver installation. It is important for Windows users to enable debugging on their devices.

2. The ADB Push Command

This ADB command will allow you to transfer any file onto your Android smartphone programmatically. When using this command to transfer files, you should be aware of certain important details, such as the complete path of the file you want to move and the full path of the section where you want to store that file.

While moving the specified file, consider the slashes and quotes in the file path. If the file name has spaces or other special characters, the path should be put in quotation marks.

3. ADB’s Pull Command

This ADB Pull Command is required for your device to retrieve the files supplied by the ADB Push Command. You must be able to access these two instructions in order to transmit and put a file in its proper location.

You should know both the path of the file you want to relocate and the path into which you want that file to be put. When you leave the target path blank, it will instantly put the file into your tools folder. To deal with any issue, remember your forward slash vs. backward slash guidelines.

4. The Reboot ADB Command

This android terminal command, on the other hand, works explicitly; you may envision a method to bring up your device from your instruction. You must type ADB Reboot and press enter. That’s all there is to it for this command.

You should be aware that these instructions are often written and that your device may reboot in the midst of a script. It’s a wise decision to decide when you want things completed.

5. Reboot-Bootloader and Reboot Recovery Commands

This Android Terminal command indicates that your device has been rebooted to the bootloader. This may be useful since these button combinations can be tricky at times, and if you have more than one device to work on, remembering them all might be difficult. Some devices cannot boot into the bootloader without the assistance of this command. This command is quite useful while working on a script.

Working with this command is simple: type ADB reboot-bootloader and press the enter key. ADB Reboot Recovery also allows certain devices to boot immediately into recovery mode, but others cannot. Anyone may experiment with this command.

6. The Fastboot Devices Command

This command might save your life if ADB unexpectedly stops functioning while you’re within the bootloader. The issue of inactivating debugging tools to connect with while not yet booted into Android may be addressed with the help of this command.

This ADB command is not accessible to all devices; if your device is able to use it, double-check its communication strategy. That is the case method of interacting with this gadget.

When you enter fastboot devices at the prompt, you will be given a serial number. It is the same as the ADB devices command, which we described before.

If you run into a driver problem and things don’t appear to be working properly on Windows, contact the manufacturer.

7. The “Unlock Fastboot Command”

The fastboot command allows you to reboot your device while wiping everything that was previously there.

The Fastboot Unlock Command is a well-known Android terminal command that primarily focuses on unlocking the bootloader. Unlike other commands, this one is only available on certain phones.

If you break its rules, Google Play access will not be affected by anything you do with Google. It demonstrates Android’s broad openness. It is a simple technique to solve the issue, even if you do not support the phone’s maker.

When you’re ready to begin, but “fastboot flashing unlock” into the prompt and press enter. You are now ready to use this command and ensure that everything is in sync.

8. The ADB Install Command

The ADB Install Command is mostly used to install files transferred through ADB Push onto your Android device. You must supply the path to the stored apk file before running it.

This command will undoubtedly make upgrading an app a more pleasant experience. You’ll see an extra choice here, which you may install on an SD card. You may use this command to remove any software by its package name. It also includes an option. This option will remove the program while retaining all app data and cache.

9. Command for ADB Sideloading

This ADB command instructs your phone to download a zip file as an OTA (over-the-air) update. Even if your phone is unable to send the update, the zip file may be manually loaded using this program. It eliminates the need to wait for a new version to be downloaded. It is a useful command that allows you to improve the accessibility of your phone.

Simply install the update on your computer and connect your phone to it. Reboot your device and choose “Apply update from ADB” using the up and down volume keys. Open your command prompt and enter ADB sideload Full-Path-to-the-File.zip and press enter. This is all there is to it; the rest can be handled by the present tool.

10. The ADB Shell Command

The majority of people who use this command are perplexed. It becomes sturdy to understand totally due to its two modes of operation. One method is to transmit a command to a device for execution in its command-line shell, and the other is to access the device’s command shell from your terminal.

Enter ADB Shell at the prompt line, and you will now have access to it. It is simple to get there. It would be beneficial if you exercise extreme caution when working on this command since it is likely to create problems.

If you are unfamiliar with this, we urge that you follow each step carefully to prevent a negative experience. Another approach to using this ADB Shell Command is to instruct your phone to perform a shell command even if you are not in the shell. This is a simple method to use this command.

Also Read: How to Find and Remove Spy App on Your Cell Phone

FAQs on Android terminal Commands (ADB)

What are the advantages of using Android terminal commands?

We may interact with our devices by using Android terminal commands. This allows you to perform commands inside the shell more smoothly.

How do I utilize a phone command?

You may easily execute any command by following the instructions on your phone. These commands are simple to use for everyone. You must customize your selection and choose the best one.

Are Android terminal commands easy to use?

The majority of the commands are intended for experienced terminal programmers. Fortunately, many of them are simple to use. To access these commands at the beginner level, we must first grasp how they operate.

One Response

Add a Comment

Your email address will not be published. Required fields are marked *